Di tin dɛn we gɛt fɔ du wit di tin dɛn we dɛn dɔn mek .
Material: Rigid ɔ fleksibul polyvinyl klorayd (PVC)
Finish: Smooth ɔ perforated (fɔ bɛtɛ plasta bɔndin)
Kɔlɔ: Tipikli wayt, bɔt de insay ɔda kɔlɔ dɛn we yu aks fɔ am
Sayz: Kɔmɔn saiz dɛn na 8mm, 10mm, 12mm, 15mm, ɛn kɔstɔm dimɛnshɔn
Tayp dɛn fɔ PVC Kɔna Bidz we wi de gi
Wi de gi ova 30 difrɛn mɔdel dɛn fɔ PVC kɔna bidz, inklud .:
Standart rayt-ɛngl kɔna bidz .
Bullnose PVC Kɔna Bidz (fɔ saf, rawnd kɔna dɛn)
Arch Corner bidz (fɔ kɔba aplikeshɔn dɛn)
PVC kona bidz wit mesh (fo strong bond wit plasta)
Drip-edj kɔna bidz (fɔ ɛkstirian ren protɛkshɔn)
Bid dɛn wit shado layn ɔ rivɛl ficha dɛn .
Aplikeshɔn dɛn fɔ PVC Kɔna Biad .
1. Inst ɔ leshɔn fɔ Draywal .
PVC kɔna bidz dɛn kin yuz na draywal sistem fɔ mek krisp, rayt-ɛngl ɛksternal kɔna dɛn. Dɛn kin put dɛn insay jɔyn kɔmpawnd, we kin mek di kɔna dɛn strɔng ɛn nɔ kin izi fɔ chip.
2. Simen rɛnda .
Insay siment-based plastering projɛkt, PVC kɔna bidz de gi wan ɔda we we go de fɔ lɔng tɛm ɛn we nɔ gɛt rɔst to mɛtal bidz. Dɛn kin ɛp fɔ mek klin edj dɛn we dɛn de du di rɛndɛrɛshɔn prɔses ɛn impruv di mɛkanikal ki fɔ plasta bikɔs ɔf pɔrfɔret flɛnch ɔ ataya mɛsh.
3. Stucco ɛn EIFS sistem dɛn .
PVC kɔna bidz dɛn kin yuz bɔku say dɛn na ɛkstirian insuleshɔn ɛn finish sistɛm (EIF) ɛn tradishɔnal stukɔ sistem, mɔ na rijyɔn dɛn we gɛt chenj we de chenj chenj. UV-stabilized PVC kin bia wit ɔda tin dɛn we de apin na do we nɔ de fade, krak, ɔ wɔp.
4. Gypsum bod finishing .
Insay intɛriɔ dɛn dɔn wit gip bɔd, PVC kɔna bidz de mek wan impɔtant pat pan di taping ɛn jɔyn prɔses. Dɛn de gi wan rilibul bays fɔ kɔmpawnd aplikeshɔn ɛn ɛp fɔ mek shap layn dɛn we de smol smol afta dɛn dɔn peint.
5. Patishɔn wɔl kɔnstrɔkshɔn .
PVC kɔna bidz dɛn fayn fɔ laytwɛt patishɔn wɔl, mɔ na fast-trak kɔmɛshɔnal kɔnstrɔkshɔn. Dɛn kin ad rigiditi to kɔna dɛn na sistem dɛn we dɛn bil wit draywal, gip bɔd, ɔ layt stɛl frem.
6. Intɛriɔ dɛkɔreshɔn .
Dɛn kin yuz PVC bidz na dɛkɔretiv aplikeshɔn usay kɔna dɛn nid fɔ de we dɛn dɔn difayn fayn ɔ we dɛn dɔn sof (ɛgz., bulnɔz bidz). Dɛn kin yuz dɛn bak na shado layn ɛn dɛn kin sho ditaylin fɔ mek dɛn ebul fɔ si fayn fayn tin dɛn.
7. Ɛkstirian insuleshɔn ɛn finish sistɛm dɛn (EIFS) .
PVC kɔna bidz dɛn we dɛn yuz na EIF dɛn de mek di wɛda nɔ de, drenaj, ɛn mɛkanikal trɛnk na di wɔl dɛn we de na do. Dɛn nɔ-kɔrosiv nature mek dɛn di prɛferɛd opshɔn insay sistem dɛn we de kɔba insuleshɔn panɛl ɛn polima-bɛs rɛnda.
Instɔlɛshɔn Gayd: I izi ɛn Efisiɛns
Instɔl PVC Kɔna Bidz simpul ɛn na pɔshɔnal ɔ skilful DIYER dɛn kin dɔn am. Dɛn kin put di bid insay di jɔyn kɔmpawnd ɔ plasta ɛn i kin bi pat pan di wɔl afta dɛn dɔn dɔn am.
Tul dɛn we yu go nid .:
Tep fɔ mɛzhɔ .
Yutiliti naif ɔ PVC Snips .
Jɔyn kɔmpawnd ɔ plasta .
6-inch jɔyn naif ɔ trowel .
Sandpaper ɔ sanding spɔnj .
Step-by-Step Inst ɔ leshɔn .
Step 1: Mekɔp ɛn kɔt .
Mekɔp di ayt fɔ di kɔna ɛn kɔt di PVC biad to di lɔng we yu nid yuz shap snip ɔ yutiliti naif. PVC layt ɛn i izi fɔ kɔt klin wan.
Step 2: APle plasta ɔ kɔmpawnd .
Put wan jenaros kot fɔ jɔyn kɔmpawnd ɔ plasta na di kɔna eria yuz trowel. Fɔ ɛkstirian stukɔ ɔ simen rɛnd, put di fɔs bays kot bifo yu put di bid.
Step 3: Embed di biad .
Pozishɔn di PVC kɔna biad na di kɔna, prɛs am fayn fayn wan insay di wet kɔmpawnd. Mek shɔ se di ed dɛn alaynɛd wit ɔl tu di wɔl sɔfays ɛn mek di bid sidɔm stret ɛn flush.
Step 4: Put ɔda kɔmpawnd .
Yuz wan jɔyn naif fɔ put mɔ kɔmpawnd oba di bid, fɛda di matirial 4–6 inch pan di wɔl sɔfays dɛn. Smooth ɛn lɛvɛl di kɔmpawnd wit ɛni pas fɔ mek shɔ se wan ivin sɔfa.
Step 5: Mek i dray ɛn sand .
Alaw di kɔmpawnd fɔ dray kɔmplit wan (tipikli 12–24 awa). We yu dɔn dray, yu kin sand ɛni rij ɔ ay spat fɔ wan pafɛkt smol finish. Put ɔda kot dɛn if nid de.
Ki bɛnifit dɛn fɔ PVC Kɔna Biad .
1. Rust-fri ɛn kɔrɛshɔn-rɛsistɛns .
Nɔ lɛk mɛtal bidz, PVC kɔna bidz nɔ de ɛva rɔst, we de mek dɛn bi di bɛst chus fɔ wet eria dɛn lɛk batrum, kichin, bɛsin, ɛn ɛkstirian wɔl dɛn.
2. Layt ɛn izi fɔ handel .
PVC na signifyant layt pas mɛtal, we de ridyus transpɔt kɔst ɛn impɔtant on-sayt hanlin. InstƆlers kin izi fɔ kɔt ɛn put PVC bidz dɛn we nɔ gɛt ebi-diuti tul dɛn.
3. Fleksibul ɛn impak-rɛsistɛns .
PVC de gi fayn fayn resistans fɔ dent ɛn krak we dɛn de instɔl ɔ muv di wɔl. I smɔl fleksibiliti de alaw am fɔ absɔb smɔl bildin shift dɛn ɛn mek di ed nɔ pwɛl.
4. Klin, profeshɔnal finish
Ɛp fɔ ajɔst pafɛkt stret ɔ rawnd kɔna wit smɔl ɛfɔt, we de rilizɔt wan ay-ɛnd finish we de ɛp fɔ mek di vijual kwaliti fɔ ɛni intɛriɔ ɔ ɛkstirian spɛs.
5. Ekselen bond wit plasta ɔ stukɔ .
Bɔku PVC kɔna bidz dɛn kin kam wit pɔrfɔret flɛnch ɔ fayv-glas mɛsh, we kin mek dɛn impruv mɛkanikal bɔndin wit plasta ɛn pul separeshɔn ova tɛm.
6. Customizable .
Wi de sɔpɔt kɔstɔm lɔng, kɔlɔ, prɔfayl, ɛn prayvet lɛbl fɔ fit yu brand ɔ prɔjek nid.
Wetin mek yu fɔ pik wi PVC Kɔna Bidz?
As pɔsin we de mek ɛn gi pɔsin tin fɔ mek am, wi de gi wi:
Stebul prodakshɔn kapasiti wit strikt kwaliti kɔntrol .
Bulk Supply ɛn OEM . savis fɔ ɔlsay ɛn kɔntrakta dɛn .
Ekspɔt ɛkspiriɛns to pas 30 kɔntri dɛn na Yurop, Nɔt Amɛrika, Sawt Is Eshia, ɛn di Midul Is
Customized profayl fɔ spɛshal dizayn nid ɔ projɛkt spɛsifikɛshɔn dɛn .
Fast delivri ɛn rilibul pak fɔ damej-fri transpɔt
If yu de sos fɔ wan hadwae distribyushɔn, bildin matirial ritayla, ɔ wan big-big kɔnstrɔkshɔn prɔjek, wi kin gi kɔnsistɛns kwaliti, kɔmpitishɔn prayz, ɛn fleksibul sapɔt opshɔn dɛn.
